HORDA 410NiMo
:
EN ISO 14700 S Fe 7
:
AWS A5.9 410NiMo
:
-
Solid wire with a low carbon content of 13% Cr, 4.5% Ni, Mo which can be used for repair and hardening surfacing.
Chromium-resistant metal, deposited with HORDA 42H wire is recommended for products operating under conditions of abrasive and cavitation wear with impact loads, including at elevated temperatures. The weld metal resists corrosion, corrosion cracking, impact loads and thermal fatigue well. Preliminary and accompanying heating up to a temperature of 100-130 ° C is required only for massive thick-walled parts
Typical chemical composition
| C | Si | Mn | S | P | Cr | Ni | Mo |
| 0,035 | 0,7 | 0,7 | 0,010 | 0,015 | 13,0 | 4,5 | 0,5 |
Typical mechanical properties all weld metal
Weld metal hardness in the "after welding" state
(Wire diameter1,2 mm, shielding gas Ar+2%CO2)
| Method of surfacing | First layer | Second layer | Third layer |
| CMT Fronius | 38-40 | 41-43 | 41-43 |
| With constant wire feed | 35-37 | 37-39 | 39-41 |
Other welding conditions can give another hardness
Available diameters and packaging
| Diameter,mm | 1,0 | 1,2 | 1,6 | 2,0 | 2,5 | 3,0 | 4,0 |
| Spool BS 200 5kg | х | х | - | - | - | - | - |
| Spool BS 300 15-18 kg | х | х | х | х | - | - | - |
| Spool К 415 25-30 kg | - | - | - | х | х | х | х |
| Drum "DizhkaPack" 250 кг | х | х | х | х | - | - | - |
